Oriveti OD200 Review – Smooth, Sonorous

Pros –

Excellent build and ergonomics, Fantastic stock cable with modular connectors, Lush yet natural voicing, Responsive bass, Minimal wearing pressure

Cons –

Reduced separation, Below-average isolation, Minimal sub-bass slam

Verdict –

The OD200 is an interesting IEM that has notably more niche appeal than most, focusing on responsiveness, richness and outstanding long-term listenability.

---

About Oriveti –

Oriveti is a HiFi brand from Hong Kong founded in 2015. Focusing on the core principles of sound, fit, comfort and reliability, the company seeks to innovate and deliver an impressive experience despite the wealth of competition. They were responsible for producing one of the first hybrid in-ear monitors on the market in the form of the Primacy. Since, Oriveti has spent years developing its latest range of products using many bespoke components. The company hasn’t hugely diversified but has spent time honing its existing range of products over the years.

Introduction –

The OD200 is the latest addition to Oriveti’s single dynamic driver line-up sitting just above the recently released OD100. It offers an alternative tuning to the OH hybrid driver earphones and O range of all-BA models. With a bespoke design and exclusive 9.8mm Be-coated dynamic driver, the OD200 is a more ambitious offering than the OD100 and seeks to deliver far greater performance. This has been achieved not only with revisions to the raw driver design but also the housing around it, pressure-balancing vent array and Oriveti exclusive DAD system.

The OD200 is available for $199 USD. You can read all about it and treat yourself to a unit on Oriveti’s website here.

Disclaimer –

I would like to thank Marco from Oriveti very much for reaching out to organise a review of the new OD200. All words are my own and there is no monetary incentive for a positive review. Despite receiving the earphones free of cost, I will attempt to be as objective as possible in my evaluation.

Contents –

• Page 1: Intro, Unboxing, Design
• Page 2: Sound and Source Pairings
• Page 3: Comparisons & Verdict

Specifications –

• Drivers: Exclusive Be-Coated 9.8mm Dynamic Driver
• Housing: Solid CNC Milled Metal Body
• Frequency Response: 20 Hz – 20 kHz
• Impedance: 16 ohms
• Sensitivity: 108 dB

Behind the Design –

CNC Metal Housing

The OD200 sports a CNC-milled metal shell with a sculpted ergonomic design. They sport exchangeable tuning nozzles and come in British Racing Green, a distinct and striking colour. Internally, the earphones have multiple sound chambers that help to balance airflow and reflections around the dynamic driver, optimising its function.

Dedicated Airflow Distribution (DAD)

Oriveti posit that air control is pivotal to a dynamic driver design and have approached this using their patent-pending DAD system. This involves a tube that connects the front chamber of the dynamic driver to the rear almost like the Ocharaku IEMs of old. The company posits this benefits driver responsiveness and reduces distortion.

Unboxing –

Oriveti has really stepped up the unboxing experience with the OD200, providing a similar square box as seen on their other models but with a new tray design. Sliding the outer shell off reveals the earphones and tuning nozzles within a foam inlet. Below is a slide-out drawer containing the leather button-clasp carrying case and a laser-cut foam piece with other accessories. The case has a genuine leather finish and green stitching to match the earpieces.

It is reminiscent of the OH cases but has slightly larger dimensions which better accommodates the earphones with ample room for accessories too. Speaking of which, a generous selection is included. There are 3 sizes of 3 styles of ear tips, memory foam, large-bore silicone and small-bore silicone. In addition, the cable has a modular connector permitting use with 3.5mm, 2.5mm and 4.4mm sources. Finally, a cleaning tool is included for easy maintenance.

Design –

Oriveti may have only a few models, but each has its own distinct character and design. I recall lauding the original Primacy for its superlative ergonomic design and the OD200 demonstrates that the company has mastered the craft. The OD200 has a 2-piece CNC milled metal shells with nigh perfect tolerances as though seams are visible, they can barely be felt. The shells are finished in a deep and mature British Racing Green with a subtle brushed texture on the faceplates and gloss on the Oriveti branding. Two vents are visible, an elongated port on the faceplate and a mesh grill on the front near the nozzles. In addition, the earphones offer two tuning options via interchangeable threaded nozzles. Overall, the OD200 provides a sleek, quality and high-performance aesthetic.

The included cable only further enhances this impression. It’s a 2-pin 0.78mm cable meaning aftermarket options will be abundant. It has brushed metal connectors that suit the grain of the faceplates in addition to grey and green conductors that complement the overall colour scheme beautifully. The 8-wire cable is exceptionally supple with zero memory. It coils easily for storage and is very tangle-resistant. The pre-moulded ear guides are comfortable and aid a stable fit. Meanwhile, the source connector is modular using a 4-pin connector as seen on many competitors. Beyond sound tuning, I can hardly see the need to replace the included cable as it demonstrates superb quality.

Fit & Comfort –

The OD200 is a medium-sized in-ear with a very curvaceous design. They slot very confidently into the outer ear and match its anatomical folds with aplomb. This aids both stability and comfort over time. If you have especially small ears you may want to consider the OD100 instead. However, the vast majority should experience excellent wearing comfort suitable for long listening sessions due to the sculpted and rounded design that minimises hotspot formation. The seal is also excellent due to the well-shaped housings and nozzles.

They offer great stability with this and the over-ear fit. One thing to note is the abundant venting of the housing. This means there is absolutely zero wearing pressure and also that sound isolation is below average. While they do still isolate to a modest degree, they do sound notably more open than most vented in-ears. The reduced wearing pressure is welcome as is the spatial awareness this affords. They are also ample for day to day use but those prioritising isolation will want to look elsewhere.

Next Page: Sound Breakdown